White Fused Alumina: Properties, Sizes and Industrial Applications

1. What Is White Fused Alumina?

White fused alumina, also called WFA, white aluminum oxide or white corundum, is a high-purity synthetic alumina abrasive produced from industrial alumina powder. The raw material is melted in an electric arc furnace at high temperature. After cooling, crushing, magnetic separation and screening, it is processed into different grit and powder sizes.

White fused alumina is known for high Al2O3 content, high hardness, low impurity level and clean white color. It can be supplied as abrasive grit, powder or micron powder for blasting, grinding wheels, coated abrasives, lapping, polishing, ceramics, refractory materials and precision surface treatment.

For industrial buyers, white fused alumina is not a single product specification. Different applications require different particle sizes, grading standards and chemical requirements. If a buyer only asks for "white fused alumina price," the supplier cannot know whether the real need is blasting media, grinding wheel grit, micron powder or low sodium WFA.

2. Main Properties of White Fused Alumina

Typical white fused alumina properties include:

Main composition: Al2O3, usually above 99%

Color: White

Hardness: About Mohs 9

Crystal form: Alpha alumina

Particle shape: Angular

Common forms: Grit, powder and micron powder

Common standards: FEPA F, FEPA P, JIS and micron grades

High hardness gives WFA strong cutting ability. Its angular shape is suitable for blasting and grinding. Its low impurity level makes it useful when buyers need clean surface treatment, low iron contamination risk and stable surface quality.

3. White Fused Alumina Grit vs Powder

Before buying white fused alumina, buyers should first confirm whether they need grit or powder.

White fused alumina grit:

WFA grit usually refers to coarser abrasive grains such as F12, F24, F36, F46, F60, F80, F100, F120, F150, F180 and F220. It is used for blasting, grinding wheels, coated abrasives and refractory aggregates.

White fused alumina powder:

WFA powder usually refers to finer material such as 240 mesh, 325 mesh, FEPA micron powder, JIS powder, W-series powder and custom micron grades. It is used for lapping, polishing, ceramics, AG glass treatment, dental blasting and precision finishing.

If the application is blasting or grinding wheels, buyers normally need white fused alumina grit. If the application is lapping, polishing or ceramic fine powder formulation, white fused alumina powder or micron powder is more suitable.

4. White Fused Alumina for Sandblasting

White fused alumina blasting media is used for stainless steel, aluminum alloy, glass, ceramics, molds and precision components. It is selected because it is hard, sharp and low in iron contamination risk.

Size reference for blasting:

Strong surface cleaning: F36-F60

General blasting: F60-F100

Glass frosting: F80-F120

Logo and pattern blasting: F100-F150

Precision blasting: F150-F220

For example, glass sandblasting buyers can test F80, F100 and F120. Stainless steel coating preparation can start with F60, F80 or F100. Precision parts may require F150 or finer grit.

5. White Fused Alumina for Grinding Wheels and Abrasive Tools

White fused alumina can be used in vitrified grinding wheels, resin grinding wheels, mounted points, cutting wheels and coated abrasives. It is suitable for tool steel, alloy steel, hardened steel, stainless steel and applications requiring good surface quality.

Grinding wheel size reference:

F24-F36: Rough grinding and high stock removal

F46-F60: General grinding with balanced efficiency and wheel life

F80-F120: Fine grinding, tool grinding and surface finishing

F150-F220: Precision grinding and profile grinding

For grinding wheel production, buyers should not only check Al2O3 content. Particle size distribution, bulk density, magnetic material, grain shape and batch consistency are also important.

6. White Fused Alumina for Lapping and Polishing

White fused alumina powder and micron powder can be used for lapping and polishing glass, ceramics, metal parts and precision surfaces. In this application, particle size distribution is more important than only average particle size.

Typical uses include:

1. AG glass surface treatment

2. Ceramic component lapping

3. Metal part finishing

4. Lapping compounds and polishing slurry

5. Dental blasting and surface roughening

6. Precision component surface treatment

If the buyer needs a finer surface with fewer scratches, a narrower particle size distribution is recommended. If faster cutting is required, a relatively coarser powder may be selected.

7. White Fused Alumina for Ceramics and Refractory Materials

White fused alumina has high melting point, high hardness and good chemical stability. It can be used in high-alumina refractory materials, castables, kiln furniture, ceramic products and special ceramic formulas.

In refractory materials, coarse grains and fine powders can be combined to improve packing density and high-temperature performance. In ceramic applications, buyers may pay more attention to Na2O content, Fe2O3 content, particle size distribution and sintering stability.

For example, ceramic membrane, electronic ceramic or high-purity ceramic applications may require low sodium or ultra-low sodium white fused alumina. Ordinary blasting or common grinding may not need such strict sodium control.

8. How to Choose the Right White Fused Alumina

Buyers should choose WFA according to application first, then confirm particle size and specification.

For blasting:

Confirm workpiece material, target roughness, blasting method, grit size and dust content.

For grinding wheels:

Confirm FEPA F size, bond type, workpiece material, bulk density and particle size distribution.

For coated abrasives:

Confirm FEPA P size, particle shape, coating behavior and scratch control.

For polishing:

Confirm micron size, particle size distribution, maximum particle control and impurity level.

For ceramics or refractory materials:

Confirm Al2O3, Na2O, Fe2O3, size combination and high-temperature performance.

9. RFQ Information Buyers Should Provide

To receive an accurate quotation, buyers should provide:

1. Product name: white fused alumina / white aluminum oxide / white corundum

2. Product form: grit, powder or micron powder

3. Particle size: FEPA F, FEPA P, mesh, JIS or micron grade

4. Application: blasting, grinding wheels, coated abrasives, polishing, ceramics or refractory materials

5. Chemical requirements: Al2O3, Na2O, Fe2O3, magnetic material or other limits

6. Whether low sodium or low iron is required

7. Sample quantity or bulk order quantity

8. Packaging requirement

9. Destination country or port

10. Required documents: COA, TDS, MSDS or particle size report

Clear inquiry example:

We need white fused alumina F100 for glass sandblasting, 1 ton trial order, 25 kg bags. Please provide COA, particle size report and quotation.

10. FAQ

What is white fused alumina?

White fused alumina is a high-purity synthetic aluminum oxide abrasive used for blasting, grinding wheels, lapping, polishing, ceramics and refractory materials.

Is white fused alumina the same as white aluminum oxide?

In most industrial purchasing, both terms refer to the same material. White fused alumina describes the fusion process, while white aluminum oxide describes the material.

What grit size is used for white fused alumina blasting?

F60-F100 is common for general blasting. F80-F120 is often used for glass frosting. F100-F150 or finer sizes can be used for fine blasting and pattern work.

What is the difference between white fused alumina grit and powder?

WFA grit is used for blasting, grinding wheels, coated abrasives and refractory aggregates. WFA powder or micron powder is used for lapping, polishing, ceramics and precision surface finishing.

How should buyers choose between white fused alumina and brown fused alumina?

White fused alumina has higher purity and lower iron contamination risk, making it suitable for stainless steel, glass, ceramics and precision processing. Brown fused alumina is tougher and more economical for general steel, cutting wheels and heavy-duty grinding.

Should buyers test samples before bulk order?

Yes. The final performance depends on particle size, equipment, workpiece material, bond system, coating system or polishing process. Sample testing helps reduce bulk purchasing risk.

If you are looking for white fused alumina, please send your required product form, particle size, application, quality specification, order quantity and packaging requirement. We can recommend a suitable WFA grade and provide samples, COA and quotation for blasting, grinding wheels, coated abrasives, lapping, polishing, ceramics or refractory applications.

Abrasives

High-purity abrasives for various industrial applications.

Products

xlabrasivematerial@gmail.com

+8615890168176

© 2026. All rights reserved.