Professional Abrasives & Grinding Solutions +8615890168176 xlabrasivematerial@gmail.com
Walnut shell cleaner removes carbon buildup more effectively and thoroughly!
Walnut shells are an organic, natural polishing material, not a chemical material. Using it as an abrasive will not damage the workpiece surface. Using walnut shell abrasive to remove carbon deposits will not harm the engine and is highly effective.
NEWS&BLOG
11/17/20262 min read


What is Walnut Shell Abrasive?
Walnut shell abrasive is made from walnut shells. After crushing the shells, it undergoes strict screening, sorting, and refining processes. It boasts advantages such as high hardness, high pressure resistance, and wear resistance. Its porous surface provides strong adsorption and dirt-trapping capabilities. It is non-corrosive, non-toxic, and has low solubility in acids, alkalis, and water. Walnut shells are an organic, natural polishing material, not a chemical material. Using it as an abrasive will not damage the workpiece surface. Using walnut shell abrasive to remove carbon deposits will not harm the engine and is highly effective.
How to use walnut shell abrasive for carbon deposit cleaning?
This cleaning method is performed with the engine off; the engine must not be started during the cleaning process. Before cleaning, the mechanic strictly adheres to maintenance procedures, covering the car with a cloth and then removing the intake manifold. The image below shows the condition of the intake manifold and intake valves before cleaning; carbon deposits can be seen on the intake manifold walls and intake valves.
Since the valve opening and closing status is directly determined by the crankshaft and intake and exhaust camshafts, the valves are only closed during the compression and power strokes. Walnut shells cannot enter the engine cylinders, so there is a specific order to cleaning intake valve carbon deposits:
1. Clean the closed intake valves, then rotate the crankshaft to close the open intake valves before cleaning again.
2. Add walnut shells to the cleaning machine. Connect the large suction pipe to the intake manifold. A small hole at the top of the suction pipe allows the walnut shells to be sprayed into the intake manifold through the blasting nozzle.
3. High-pressure air is used to spray the walnut shells into the engine's intake manifold through the blasting nozzle. The high-pressure, high-speed sand particles tumble and impact within the closed intake manifold, washing away carbon deposits from the intake valves and intake manifold walls.
4. Finally, the walnut shells and the impacted carbon deposits are sucked out using a suction device.
The cleaning process for other intake manifolds is similar; the technician will turn the crankshaft to close the other open intake valves.
Will walnut shells, being very hard, damage the engine when turned into walnut shell abrasive?
Walnut shells are an organic, natural polishing material, not a chemical material. Using them as an abrasive will not damage the surface of the workpiece. Using walnut shell abrasive to remove carbon deposits will not harm the engine, and the effect is obvious.
Comparing the pictures before cleaning, it is clear that the carbon deposits on the intake manifold and intake valves have been completely removed.
In the weeks following the carbon deposit cleaning, the car owner reported normal driving performance, and the engine no longer experienced idling vibrations or abnormal vibrations.
— XINLI ABRASIVES
White Fused Alumina
Have an Abrasive Question?
Looking for the right abrasive for your application? Tell us about your material, process, required grit size, and application. Our technical team can help recommend a suitable abrasive solution.
Diamond Powder
Cerium Oxide Powder
Zirconia Beads
Corn Cob Abrasive
Walnut Shell Abrasive
Alumina Powder
Black Silicon Carbide
Green Silicon Carbide
Brown Fused Alumina
Abrasives
High-purity abrasives for various industrial applications.
CONTACT US
© 2026. All rights reserved.











